Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet Meastro input shaping with accel

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    duet maestro input shaper ringing
    1
    2
    317
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Slzerundefined
      Slzer
      last edited by

      Long story short I have some ringing.

      I've been reading up on DAA and input shaping here:
      https://duet3d.dozuki.com/Wiki/Accelerometers
      https://duet3d.dozuki.com/Wiki/Gcode#Section_M593_Configure_Dynamic_Acceleration_Adjustment

      Before I order the LIS3DH accel and redesign a bit of my XY carriage to mount it can someone canfirm or deny if I can use it with a Duet Maestro. My firmware version is 3.2.2 do i just need to upgrade to 3.3?

      I couldn't see anywhere where it specifically said it was possible?

      Slzerundefined 1 Reply Last reply Reply Quote 0
      • Slzerundefined
        Slzer @Slzer
        last edited by

        Nevermind!

        80ce8bef-1abd-4a55-b140-1b877e3ff300-image.png

        My poor reading skills didn't clock that the Maestro had been grouped with duet 2 wifi + ethernet.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA