RRF 2.05.1 (Duet2)
arcobelgo last edited by
Hi, does RRF 2.05.1 accept variables in the gcode programming? If yes, how should this be done? Variables settings like #100 are returned with an error message.
SIam last edited by
@arcobelgo short answer : NO you need at last RRF 3.3+ to u7se this feature https://duet3d.dozuki.com/Wiki/GCode_Meta_Commands
oliof last edited by
RepRapFirmware 3.x is available for Duet2 hardware though (Duet2Wifi/Ethernet and Duet Maestro).