1HCL board release
-
I was wondering if the form factor/mounting hole spacing of the board is going to be the same as the beta versions? I am about to get some panels routered out, one of which all the electronics are going to be mounted to and I want to make sure that I accomodate for the boards when they become available.
Sam
-
@samlogan87 yes
Some connectors have moved along the edges and the magnetic sensor has changed to a 2x5 connector. The mounting holes have not changed.
-
@t3p3tony thanks for that. Look forward to them being released
Sam
-
@t3p3tony Hi Tony, can’t seem to find my other post on another thread asking but do you have any updates on when the boards will be available
-
@samlogan87 I am actually working on the test rig this week. Once the factory have the test rig they can assemble and test them. What we still need to do a bit of work on is the firmware, especially the PID tuning.
-
@t3p3tony so are you hoping a few weeks or a couple of months?
Cheers
Sam -
@samlogan87 hardware is in the order of weeks. Firmware we have one critical thing to test. once that is done I will know more.
