Example calibration corexy with 3 Z motors
-
@peirof I have powered on my Pi that ran with the V-Core Pro in SBC mode and updated my configuration files on my personal github. Not much has changed. Be aware that you will need to adjust for your own machine and that you won't be able to copy it over 1:1 unless you use a toolboard with address 10, a Hemera with maxiwatt heater, and a dc42 IR probe. And even then you will likely have somewhat different offsets etc. since my V-Core Pro was not a V-Core 3 (even if some of the V-Core 3 features were beta tested on it).
-
@oliof thx...
URL of your Github?
-
-
@peirof more sample configs
https://github.com/Nurgelrot/RatRig-VCore-3-Configs (working config on a printer)
https://github.com/Stuhl-im-Orbit/My_V-Core3/tree/main/My_Config (untested config for a printer that's being built)
-
@oliof thx
