Movement width & preset temp

[Topenga]

PanelDue

Hello,

have a PanelDue 4,3" with V3.
How i can change the movement width?

Is There a Posiability to set preset temperatures for the hotend as well for the heated bed as
in DuetWeb?

Many thanks in advance

Danijel

[Phaedrux]

@topenga said in Movement width & preset temp:

How i can change the movement width?

What do you mean by width?

@topenga said in Movement width & preset temp:

Is There a Posiability to set preset temperatures for the hotend as well for the heated bed as
in DuetWeb?

Not exactly. You can use macros to accomplish this.

[Topenga]

for manuel trevelling via PanelDue there are some Touchkeys to drive the axis's +/- with width or rather travel distance.
How to change the figures for the travel distanc on Touchkeys?

Thx

Danijel

[Phaedrux]

I don't think that's customizable at the moment. Just the feedrate.

What paneldue firmware are you using?

[Topenga]

@phaedrux

Thanks a lot for your answer

Danijel