Write a plugin for DWC- solved using BtnCmd.

moth4017

@mintytrebor works perfect now thanks

moth4017

moth4017

hi what have i not done correct to post a "global value".

MintyTrebor

@moth4017 I'm not sure if the HTTP post function is capable of using global variables. I'll have to check the code. Hopefully it won't be too much issue to add it for the next release.

moth4017

@mintytrebor

thanks, is there away to display text, from a post from another device,

e.g we have the esp32 that will send a message (http) to your plugin "remove empty spool" or "place calibration weight " up to 4 messages needed

MintyTrebor

@moth4017 I'm not sure why you could not use the same approach as you have already done with global variables. Global's can be strings, numbers, or boolean's. Set up a variable to receive the text string, update it in the same way you have done with the other variables from your esp, and display it in a Object Model Panel.

MintyTrebor

@moth4017 I have just published the latest version with the following changes:

Changes:

Enabled Auto Restore Feature - read more here
New Experimental Feature for SBC users - read more here
Added the ability to include object model values in MQTT msgs, and HTTP Post data - read more here

https://github.com/MintyTrebor/BtnCmd/releases

moth4017

@mintytrebor

Thanks will do testing today .

moth4017

@mintytrebor

re backup auto recovery
"By renaming a standard BtnCmd backup file to BtnCmdAutoRestore.json in the SDCard SYS folder, BtnCmd will load the file automatically when any of the above conditions are met."

The standard file name being "BtnCmdSettings" and rename this to BtnCmdAutoRestore.json is this correct?

I tried installing the new version over the top of the old one, first stopping the plugin , but my printer would not start after that so recreated the files on the SD card and installed the new version and thats working OK .

im getting this http message when i post this command

MintyTrebor

@moth4017 said in Looking for someone to write a plugin for DWC:

The standard file name being "BtnCmdSettings" and rename this to BtnCmdAutoRestore.json is this correct?

It's whatever you named the backup file when you created it. The default backup file name is BtnCmdSettings.json.

In the img there is no post data - so it cannot post anything.

moth4017

@mintytrebor

im not sure if im using "post" correctly. it is working but the http error being reported.

"http://192.168.0.10/tare" is what i need to post. i have tried putting "tare" in the data field but this didnt work. i also tried using "Get" this works too but i get the same http error message . It also says "check Browser Console for more details " but there is never any details.

Other wise were about 80% of the way through the project .

MintyTrebor

@moth4017 If you don't want to send any data then put

{}

in the post data field.

moth4017

@mintytrebor

Hi tried the { } still get the http error, are you expecting a returned code like 200?

MintyTrebor

@moth4017 when you type the Post URL into your browser what is returned?

moth4017

@mintytrebor

putting this into the browser :- http://192.168.0.10/tare{}

Reply
"Path Not Found

URI: /tare%7B%7D
Method: GET
Arguments: 0"

putting this into the browser :- http://192.168.0.10/tare
reply
"tare ok"

the tare ok message is the response from the esp32

moth4017

@mintytrebor
still having a few issues with post does this look correct

MintyTrebor

@moth4017 it's missing the http:// in the URL

moth4017

@mintytrebor
it was a long day and just over looked that one..

Ok i tried the auto restore today renamed file

closed down the browser , which clears all the cached data, restarted DWC , but when i opened up the btncmd interface it had reloaded the default page with the single panel . not the backup, did manaul of install of backup and this was ok

MintyTrebor

@moth4017 take a new backup and replace the BtnCmdAutoRestore.json with the new version. Now open your printer in a private browser window, does it auto restore then?

moth4017

@mintytrebor

Did a new backupAutoRestore file , opened up browser in "incognito" mode put in ip address of the printer , the BtnCmd file did not autorecover .