IR Probe Mount for updated E3D v6
McAdam last edited by
I made an IR Probe mount for the updated E3D v6 because most of the ones currently available will not fit, or have some design element to them that I did not like.
This one is designed to mount and give a Y offset of 16mm with 0 X axis offset.
Printed, and tested.
Hope it helps someone.
JohnOCFII last edited by
GeckoBox3D last edited by
I'm also glad to know I'm not the only one who has resorted to bodge fixing the E3D sock to my hotend! I use a thin strip of kapton tape but it was a PITA to get on…..