M671 like function for Delta printer

achrn

@tecno said in M671 like function for Delta printer:

@OwenD

Error: in file macro line 8 column 8: meta command: expected string expression

None of the macro extracts you've posted in teh thread recently even have an eighth line. What does line 8 of the macro file say?

tecno

@achrn

echo >>>"0:\sys\testFile.csv" ^ move.axes[2].machinePosition ^ ","

achrn

@tecno https://docs.duet3d.com/en/User_manual/Reference/Gcode_meta_commands#echo-command says >>> is only supported in firmware 3.5beta2 and later, what are you running?

tecno

@achrn
3.4.5 and nobody has said this before.

It runs now but still I need to get correct syntax for the csv file for all results on same line.

echo >>"0:\sys\testFile.csv" {move.axes[2].machinePosition} ,","

point1,point2,point3,point4
0.858 ,
0.824 ,
1.322 ,
0.821 ,

achrn

@tecno said in M671 like function for Delta printer:

@achrn
3.4.5 and nobody has said this before.

Well, it's been in the docs a while, I think.

It runs now but still I need to get correct syntax for the csv file for all results on same line.

I don't think you can, working it in a loop like that. you could dump the loop and do five separate probes storing in single variables then write to file with a single line, I think. e.g.

    G30 S-1  ; probe
    set var.z1 = move.axes[2].machinePosition ; memorise probe position
    G30 S-1
    set var.z2 = move.axes[2].machinePosition
    G30 S-1
    set var.z3 = move.axes[2].machinePosition
    G30 S-1
    set var.z4 = move.axes[2].machinePosition
    G30 S-1
    set var.z5 = move.axes[2].machinePosition
   echo >>"0:\sys\testFile.csv" "whatever", var.z1,  var.z2, var.z3, var.z4, var.z5

tecno

@achrn

OK, will play with your suggestion and see the results.

tecno

M98 P"0:/macros/test var.g"
Stopped at height 0.708 mm
Error: in file macro line 7 column 13: meta command: unknown variable 'z1'

G28
M562                    ; clear any bed transform from mesh leveling
G90                     ; absolute positioning
G1 Z50 F4000            
G1 X0 Y0				; 1 point
G30 S-1
set var.z1 = move.axes[2].machinePosition
G1 Z50 F4000 
G1 X-154 Y-164 F4000    ; 2 point   
G30 S-1
set var.z2 = move.axes[2].machinePosition
G1 Z50 F4000
G1 X-63 Y214 F4000      ; 3 point   
G30 S-1
set var.z3 = move.axes[2].machinePosition
G1 Z50 F4000
G1 X217 Y-52 F4000      ; 4 point   
G30 S-1
set var.z4 = move.axes[2].machinePosition
G1 Z50 F4000
echo >>"0:\sys\testFile.csv" "whatever", var.z1, var.z2, var.z3, var.z4
G28

achrn

@tecno said in M671 like function for Delta printer:

Error: in file macro line 7 column 13: meta command: unknown variable 'z1'

Well yes, you need to initialise the variables.

var z1 = 0
var z2 = 0
var z3 = 0
var z4 = 0
var z5 = 0

before you first refer to any of them.

tecno

@achrn said in M671 like function for Delta printer:

@tecno said in M671 like function for Delta printer:
Error: in file macro line 7 column 13: meta command: unknown variable 'z1'
Well yes, you need to initialise the variables.
var z1 = 0
var z2 = 0
var z3 = 0
var z4 = 0
var z5 = 0
before you first refer to any of them.

Works like a charm now!

Is there a way to replace "whatever" with date + time?

dc42

@tecno said in M671 like function for Delta printer:

echo >>"Stopped at height" ^ move.axes[2].machinePosition ^ "mm"

Should be:

echo >>"0:/sys/savedData.txt" "Stopped at height" ^ move.axes[2].machinePosition ^ "mm"

i.e. you need to specify the filename again.

Instead of using move.axes[2].machinePosition I suggest you use sensors.probes[0].lastStopHeight as I suggested earlier.

tecno

This is what works now, only missing part is date/time stamp.

; test var.g macro
datetime 0.758 1.074 1.122 0.821
datetime 0.708 1.074 1.022 0.771

G28
var z1 = 0
var z2 = 0
var z3 = 0
var z4 = 0
M562                    ; clear any bed transform from mesh leveling
G90                     ; absolute positioning
G1 Z50 F4000            
G1 X0 Y0				; 1 point
G30 S-1
set var.z1 =  sensors.probes[0].lastStopHeight
G1 Z50 F4000 
G1 X-154 Y-164 F4000    ; 2 point   
G30 S-1
set var.z2 = sensors.probes[0].lastStopHeight
G1 Z50 F4000
G1 X-63 Y214 F4000      ; 3 point   
G30 S-1
set var.z3 = sensors.probes[0].lastStopHeight
G1 Z50 F4000
G1 X217 Y-52 F4000      ; 4 point   
G30 S-1
set var.z4 = sensors.probes[0].lastStopHeight
G1 Z50 F4000
echo >>"testFile.csv" "datetime", var.z1, var.z2, var.z3, var.z4
G28

achrn

@tecno said in M671 like function for Delta printer:

echo >>"testFile.csv" "datetime", var.z1, var.z2, var.z3, var.z4

echo >>"testFile.csv" state.time, var.z1, var.z2, var.z3, var.z4

tecno

@achrn

Is there a way to format output to 0,000 and not 0.000 as this is a language problem?

dc42

@tecno if the format is CSV then you must use '.' as the decimal separator character, because ',' is used to separate one field from the next. The program you use to import the .csv file should recognise '.' as the decimal separator.

tecno

@dc42 said in M671 like function for Delta printer:

@tecno if the format is CSV then you must use '.' as the decimal separator character, because ',' is used to separate one field from the next. The program you use to import the .csv file should recognise '.' as the decimal separator.

I use LibreOffice Calc in Swedish and the import is now in TEXT mode with '.' and needs to be in NUM mode with ',' to work OK

As you can see only fields with NUM values can be used for calc and that is with comma. Field separator should be something else to be imported correctly.

dc42

@tecno I suggest you import in CSV mode instead and change the macro to insert commas between the fields.

tecno

@dc42

Have to change import to UK language settings, so it kinda works

So the datafields will have commas as decimal separators! The field separators works OK with commas.
I am sure others will have issues with this where decimal separators are commas.

Have had this kind of problems with other software where '.' was used as decimal separator. So maybe you guys should look to see what you can do to get things working all over the planet. My 2cents.

dc42

@tecno it looks like Excel allows you to specify the decimal separator when importing but Libre Office doesn't. https://ask.libreoffice.org/t/specify-decimal-separator-in-text-import/53621

tecno

@dc42

Only way around this is to set the import to:

Exel >>>>>>>>>>>>>>> no way I will pay for that MS shit