Skipping Grid Points
-
I am working on calibrating a new IDEX build with RRF 3.4.5. I ran my first G29 and I got several warnings (see attached image). Can anybody help me resolve this? My offset in my G31 is accurate and I don't know what else to do. Also, the G29 was all on one side of the bed and the interval was way off as well. Where do I go to input better coordinates? I'm not sure what additional information you would need to troubleshoot so please ask. TYIA for your help!
-
undefined SonnyD1 marked this topic as a question
-
It's skipping points that the probe can't physically reach. If you want to stop the warnings you must modify your M557 command to take your G31 offset into account. Otherwise just ignore the warnings.
-
@Phaedrux I dont want to ignore the warnings. I prefer to resolve the issue if there is one. How do I adjust the M557 command to take the G31 offset into account?
-
See my post here explaining it.
-
undefined SonnyD1 has marked this topic as solved
