[Feature Request] Extrude control in mm/s3 (flow rate)
-
It would nice to be able to toggle the extrusion control buttons so flow rate could be used rather than feed rate.
This would be especially useful when calibrating the flow rate of your hotend when using different materials -
@jay_s_uk I agree with you, but the actual way of clicking buttons for different flow-rates wouldn't be the best.
It should be a slider for flow-rate and some 'length' buttons to trigger the test... -
Just want to second this. I would love if it were a GCode value (like an M203, but for a ceiling on the flow rate). That way it could be input into the start GCode or filament files, and could be changed/checked via the console on the DWC.
