Job information height incorrect
-
Where does the duet web control read the job information from? The print height reported there is incorrect, and I'm trying to narrow down if it a duet or cura issue. Also in the progress window its reporting the incorrect total number of layers
-
By chance, are you using variable layer height in your slicer ?
-
@jens55 nope, fixed 0.3mm layer height. Even previous models would also be reported as 100mm (/333layers), even when they're smaller.
-
@ToWi1989 Hmmm ..... I recall that I had that issue at one time and I got an answer that made me ignore the issue. I must be recalling the details wrong. Sorry, no other idea.
-
Are you using supports in your slicer? I've noticed in the past that supports are often printed at different layer heights to the main body. AFAIK, DWC counts every Z move as a layer change so if supports are printed as intermediate heights, then they'll be counted as layers. So you could have 333 layers at 0.3 mm but 900+ Zmoves including intermediate supports which DWC would show as additional layers.
-
@deckingman Nope, but after some more searching I've found my anwer in an older post: https://forum.duet3d.com/topic/15761/duet-web-control-2-1-1-showing-wrong-job-height/5
My gcode also has a command to lower the bed (100mm) after the print is finished.
