5bar scara Problem configuring z probe using fsr switch

[fcwilt]

@gnmrc_ said in 5bar scara Problem configuring z probe using fsr switch:

@fcwilt no but we can use a google drive in the same way right?

I don't know. I have it but to do certain things you have to sign up for a paid account. It's not much it's still another $72 annually - minimum.

Do you have Google Drive?

Frederick

[gnmrc_]

@fcwilt yes, it would be simpler to link them there

[gnmrc_]

This post is deleted!

[gnmrc_]

@Phaedrux said in 5bar scara Problem configuring z probe using fsr switch:

This thread is a bit long now. Can you create a summary post of the issue as it is currently and I can pass it along to DC42 to see if he has any suggestions.

@Phaedrux do you have any news from DC42?

[Phaedrux]

@gnmrc_ Yes, can you please start a new thread with the core of the current problem. Include your config.g and homing file.

[gnmrc_]

@Phaedrux I have created the recap post this is the link.

[Phaedrux]

Thank you. With Formnext going on it may be a few days before DC42 can take a look.

[gnmrc_]

@Phaedrux yeah I imagine but I am not in a hurry.

[gnmrc_]

The problem is fixed, G92 command was in a bad position, it was such a simple solution...., sorry to have bothered you so much.

[Phaedrux]

Glad you were able to get it sorted out.

[JoergS5]

@gnmrc_ Thanks for confirming that you have found the solution. Don't hesitate to ask if you have more questions.