Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Scanning z probe temperature resistance?

    Scheduled Pinned Locked Moved
    Order discussion
    3
    5
    261
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Tinchusundefined
      Tinchus
      last edited by Phaedrux

      Hello. I have just saw this new product and I would really like to test it. I have several printer DIY on school. Most of them have a heated chamber, 1 of them reaches 150 C (and more in near future)
      My question is: I already use inductive sensor at these high temperatures. Is your new Z probe capable of working on these temps? Of course Im talking about the coil, the pcb board I can put it on a cold area and will manage to handle the temp on the plain cable that connects the board and the coil.

      And If I understood well, I can use it too as accelerometer in order to use input shape, right?

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @Tinchus
        last edited by

        @Tinchus I don't think that will work as the SPI cable needs to be short (like 100mm or something).
        The accelerometer is also in the SZP board, not the coil.
        The SZP board can only handle 85 degrees chamber temp

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        Tinchusundefined 1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          The sensitivity of the coil itself to temperature is still being determined.

          Z-Bot CoreXY Build | Thingiverse Profile

          Tinchusundefined 1 Reply Last reply Reply Quote 0
          • Tinchusundefined
            Tinchus @jay_s_uk
            last edited by

            @jay_s_uk I can handle this with no problem. 100MM is ok, 85 degrees is ok (temp where Im thinking is no more than 50 degrees C MAX)

            1 Reply Last reply Reply Quote 1
            • Tinchusundefined
              Tinchus @Phaedrux
              last edited by

              @Phaedrux I will wait them till final results are gathered ;(

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA