Connection of Servo with DuetMainboard 6HC
-
We are required to connect a servo motor with the following specs,
50 W to 22 kW,
Input power supply for Driver: Voltage DC 24 V/48 V・AC 100 V/200 V/400 V,
23 bit Absolute/Incremental・battery-less Absolute/Incremental encoder,
Frequency response 3.2 kHzHow do I connect this servo with my duet board(Duet MainBoard 6HC)? How to configure this in the RepRap Firmware?
-
Does your servo have it's own driver that accepts a step/dir signal?
https://docs.duet3d.com/en/User_manual/Connecting_hardware/Motors_connecting_external