Bed.g can I make Y move first, then X

  • I would like to have my first probe point to move the Y and then the X. the reason being is to avoid a bed clip location. can I just reverse them in the Bed.g file?

  • You should be able to just switch them in order. I believe the file executes as written. But you might want to move that clip before trying it.

  • administrators

    You can put a G1 command in bed.g before the first G30 command, so that the move ot the first probe point starts from a suitable location.

  • thanks guys! 😄 I'll give it a go tonight

  • Here is my home all file. When homing they go in order Z,X,Y for my main move and for fine adjustment they go reversed.
    ; homeall.g
    ; called to home all axes

    ; Relative positioning ; uncomment this line to lift the nozzle after homing
    ; Course home Z
    G1 Z725 F2500 S1
    ; Course home X
    G1 X-675 F8000 S1
    ; Course home Y
    G1 Y675 F8000 S1

    ; Move away from the endstops
    G1 X5 Y-5 F400
    G1 Z-5 F400

    ; Fine home X
    G1 X-10 F400 S1
    ; Fine home Y
    G1 Y10 F400 S1
    ;fine home Z
    G1 Z10 f400 S1

    ; Absolute positioning

Log in to reply