Revo Roto and Z Probe Spacer
-
In the Revo Roto Toolboard documentation, the picture shows the probe mounted to a spacer with the board.
My question is: Where can I find that mount? The Documentation includes a link to the github which has a basic spacer, but not the one shown in the documentation. Any assistance would be appreciated!
-
@steezebe Can you post a link to the photo showing the spacer you are referring to?
-
@gloomyandy I actually can't as I'm new and need more rep... It's in the official Duet 3D documentation
-
@steezebe said in Revo Roto and Z Probe Spacer:
I actually can't as I'm new and need more rep...
Now you can
-
Here it is: https://docs.duet3d.com/Duet3D_hardware/Duet_3_family/Duet_3_Roto_Toolboard
Please clap
-
@steezebe It's the "TC_roto_coil_mount.step" file, here: https://github.com/Duet3D/Duet3-RotoToolboard/blob/master/mechanical/TC_roto_coil_mount.step
Ian
