Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Connecting RC servo to a Toolboard V0.6

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    81
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JC42undefined
      JC42
      last edited by

      Hello, I would like to know if it is possible to directly connect a servo such as an SG90 to a ToolBoard V0.6, and what commands would be required to configure and control it. Thank you in advance for your help!

      dwuk3dundefined 1 Reply Last reply Reply Quote 0
      • dwuk3dundefined
        dwuk3d @JC42
        last edited by

        @JC42 i've used a similar servo and MG90s on a toolboard. I used a buck convertor off of the 24v input to get the 5v the servo required.

        Various details about servo's buried in my SV08 thread - starting about here if they are of any use.

        https://forum.duet3d.com/post/350131

        I presume you have already seen the standard duet3d docs on hobby servo connection.
        https://docs.duet3d.com/en/User_manual/Connecting_hardware/Motors_servos

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA