PanelDue 7i Enclosure Duet Ethernet .stl .stp files
-
I am testing some hardware for the new printer and needed to secure my PanelDue 7i and Duet Ethernet electronics. I couldnt find anything online as far as a housing so I whipped one up. This enclosure holds both board and touchscreen if desired. I'm posting this in case someone finds it useful. Posted the .stp files incase someone wants to rework the design also.
https://www.youmagine.com/designs/paneldue-7i-with-duet-ethernet#documents
-
Nice, i got a panel due 7i coming, should be delivered tomorrow
-
Yay! Thank you.
I was going to do this and was sort of hoping someone would beat me to it.
Thanks again!
-
Awesome! Did you find specs for the 7i online or did you measure it up yourself?
-
Awesome! Did you find specs for the 7i online or did you measure it up yourself?
They published a drawing link on this forum about a week ago.
-
I measured it.
-
-
I measured it.
You have my respect!
Have a meaningless Internet Point, kind sir!!
and then I just found this link on Filastruders website with CAD file and PDF
https://www.filastruder.com/collections/electronics/products/paneldue-7i
no biggy I'm sure my measurements are close. it fits
