Prints see reversed
Not sure what the problem could be my prints seem to print reversed, when i have the stl file in the slicer it looks fine correct direction. but when i print the file it seems to reverse the direction of the part i printed a part with a nut holder and a tube they should be on the right rear of the part but when printed they are now on the right front of the part.
could the motors be going wrong direction, it homes right and moves down correct..
Its on a delta printer did a 11 hour print to find out its backwards and won't work
Have the latest duet firmware.
Thanks i think i had the motors on the wrong towers
I now have z in rear x left front y right front.
X+ moves right Y+ moves towards rear Z tower
Is that correct?..
That's correct. Make sure you have the endstop switches connected correctly too or you will have problems homing the printer.
Ok thanks i did switch the end stops also and it homes ok guess I'll try a print and see how it go's