Duet Web Control Manual updated
-
I have updated the DWC manual to reflect all the recent changes and additions that @chrishamm has made:
https://duet3d.dozuki.com/Wiki/Duet_Web_Control_Manual
It is written for 1.21.2-b2 and I will tweak it slightly once the non beta version is released.
The manual is designed to cover DWC, rather than every detail of using RepRapFirmware. I would appreciate some feedback: what have I missed out, not explained well, typoed, etc.
Duet Hardware Designer
www.duet3d.com -
@t3p3tony I spotted one little inconsistency: the image of "Machine Status" right above the section "Probing the bed" shows
CPU tempinstead ofVinwhereas all other screenshots of this part I have seen i the manual showVin.P.S.: Also the (IMO very handy) new feature to change the values how much a movement button will move an axis is not mentioned.
Manuel
Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
with probably always latest firmware/DWC (incl. betas or self-compiled)
My Tool Collection -
@wilriker thanks for the feedback, I had totally forgotten about that feature and its really useful but a bit hidden so definitely in the manual now:
https://duet3d.dozuki.com/Wiki/Duet_Web_Control_Manual#Section_Adjusting_movement_amounts
Anyone else had a chance to look at this?
