Firmware Retraction Tuning with Macros
-
@phaedrux I understand that part. Understanding those macros and how to alter them is what im looking for ...
-
@dakingofhearts2003 Retraction settings are configured with M207
https://duet3d.dozuki.com/Wiki/Gcode#Section_M207_Set_retract_length
-
@phaedrux I am having some serious issues that i don't think the retraction will help but i was going to do the retraction tuning anyway. Am i supposed to enable relative extrusion distances in the slicer ? And where do i start to deal with the issue of parts coming out smaller than they are supposed to. I can get them to print well but not dimensionally accurate...
-
@dakingofhearts2003 Probably best to start a new thread to address your issues.
-
Is there are wipe while retracting function in firmware retraction aswell?
-
@d0minik96 No there is no wipe function. Usually you'd be using pressure advance anyway and wipe/coast is not recommended when using pressure advance.
