@Veti So does the gcode look right i then can see if its just a bad crimp job or etc ?
Best posts made by dakingofhearts2003
Latest posts made by dakingofhearts2003
RE: bltouch not responding to commands
@Veti This is from a previous config before the bl touch will it work ?
M305 P0 T100000 B4092 R2200 ; set thermistor + ADC parameters for heater 0
M143 H0 S150 ; set temperature limit for heater 0 to 150C
M305 P1 T100000 B4092 R2200 ; set thermistor + ADC parameters for heater 1
M143 H1 S500
bltouch not responding to commands
bl touch deploys only during power up. Does not respond to any gcode commands. I am using a duet wifi connected through the header on the board. The machine is a tevo tornado, I have included all the necessary files for trouble shooting. Thanks for your help. retractprobe.g homez.g homeall.g deployprobe.g config.g bed.g