Anybody mind if I add "off" to the tool/bed heater toggles?

[gtj0]

Right now the toggle buttons for the tools/bed heater only cycle between active and standby. Would anyone have heartburn if I added "off" to the mix so the cycle would be off->active->standby.

[T3P3Tony]

@gtj0 I think that would be helpful if you use a standby temperature and thus want a third option of off.

[gtj0]

@t3p3tony Yeah it will also mirror the DWC this way.

I'm trying to get to the point where I only need the DWC for admin tasks like uploading new firmware or editing configs or macros.

[gtj0]

Pull request sent to @dc42