Macros do not load while ATX is off

  • Hi,

    my printer has two powersuplys, a 5V and 24V. I have a SSR build in to switch the 24V.
    Because there is no button on the Paneldue to switch the printer on I wrote a Macro with M80; .
    Since I updated the paneldue frimeware the Macros load only if the 24V is on. So I have to type in M80 manually.
    If I switch 24V off the macros stay.
    Is there any solution for this?

    best regards

  • administrators

    This is on the list to be fixed in the next PanelDue firmware release.

Log in to reply