Thermostatic mode? Did I misunderstand something?



  • So, I have an E3D chimera that is water cooled - but for some reason, I have some problems with my thermostatic mode.

    This is from my config file:

    M106 P5 S0 B0.0 H4:H7 T50 L255 C"Water-pump"
    M106 P6 S0 B0.0 L255 H4:H7 T50 C"Radiator fan"

    M305 P4 T100000 B4725 C7.060000e-8 R4700 X5 ; Set thermistor + ADC parameters for heater 1
    M143 H4 S360 ; Set temperature limit for heater 1 to 360C
    M305 P7 T100000 B4725 C7.06e-8 R4700 X3 ; Set thermistor + ADC parameters for heater 2
    M143 H7 S360

    But for some reason, the pump and fan triggers on H0 instead of 4 and 7? (0 is my bed heater)

    Did I misunderstand how to configure thermostatic mode ?



  • I belive your H parameter in M106 command should be H4:7, not H4:H7



  • @aidar said in Thermostatic mode? Did I misunderstand something?:

    I belive your H parameter in M106 command should be H4:7, not H4:H7

    Bingo! We have a winner - Thanks!


Log in to reply