PanelDue 7i Firmware
-
I have updated the firmware with this PanelDue-5.0i-7.0i.bin, is that right version for this panel. Please look into the previous post for mine. https://forum.duet3d.com/topic/9448/panel-duet-not-working.
-
Look to my reply to your previous post.
-
It Looks like the right version, should i flash on the bin file or others files as well?. I never done that before. But looking at picture it does not look the same as the one shown in the product page.
-
Picture seems ok to me. Values will change when its connected to working printer (duet). Number of extruder depends on how many you have in your config.g file on duet. So all seems ok. Just make sure you connect it correctly. https://duet3d.dozuki.com/Wiki/Connecting_an_LCD_control_panel#Section_Connecting_a_PanelDue
-
The picture looks OK to me. If you go to the Setup page you will find red, green and blue colour gradients, which you can check.
