Piezo Orion settings

[andornot]

What are the best settings for a piezo orion for a delta printer? It is saying on the paneldue when i try G30 that the z probe has already triggered, i wondered if the settings in my config are wrong.

Thanks in advance

Andrew

[peirof]

hi,

i have a delta too, and PPO, and works great, with these lines in config,g

M558 P8 I1 R0.4 F300 X0 Y0 Z1; P(tipo de Zprobe) I(Inverted) R(Z probe recovery) F(Probing speed)
G31 X0 Y0 Z0 P100 ;X, Y, Z (offsets, debounce interval) P(Trigger value)

[andornot]

Thank you i will give a try