OctoPrint as Canvas... Error Connecting to Duet

Phaedrux

I'll have to boot up my Octo pi canvas hub to see if I changed anything, but I don't think there was anything in particular. I used the highest baud rate available without issue.

I seem to recall a option for ignoring any unhandled errors in Octo prints settings.

BlueDust

Connecting to: /dev/ttyACM0Changing monitoring state from "Offline" to "Opening serial port"Connected to: Serial<id=0x712d0890, open=True>(port='/dev/ttyACM0', baudrate=500000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitorStarting baud rate detection...Changing monitoring state from "Opening serial port" to "Detecting baudrate"Trying baudrate: 500000Send: N0 M110 N0*125Recv: Error: Bad command: \x01\x0e\x01\x14Changing monitoring state from "Detecting baudrate" to "Error: Bad command: \x01\x0e\x01\x14"Changing monitoring state from "Error: Bad command: \x01\x0e\x01\x14" to "Offline (Error: Bad command: \x01\x0e\x01\x14)"Connection closed, closing down monitor

Danal

I also have used a Canvas Hub and it "just worked". Homebuilt on a PI 3B+, started with the Octoprint image, added the Mosaic plugins, cabled it to Duet USB... and it just worked.

I do also remember checking the "ignore errors" box, but I believe it had to do with spurious tool changes that Mosaic is/was leaving in the file. I finally started just editing them out between the Mosiac Chroma Post-Process (and/or the online thingie) before putting the SD in the Hub.

Phaedrux

Try a different USB cable?

BlueDust

I have tried 3 cables.
The Cable I generally use when I connect the Duet2 to YAT, is the main cable I have been playing with.

dc42

The baud rate setting is irrelevant, because there is no async serial link involved (unlike with almost all 8-bit boards).
The compatibility setting in RRF needs to be set to Marlin, because Octoprint expects to receive an OK response after each command.
Use recent firmware e.g. 2.02. The Octoprint response parser is very fussy about having apparently redundant spaces in exactly the right places in responses, and older versions of RRF had one less space in one of the responses.

BlueDust

@dc42

Setting M555 to P2 did it!

Thank you! Thank you very much!

I am guessing that everyone else who got this working and told me that it just worked, already had this set....

Phaedrux

@bluedust said in OctoPrint as Canvas... Error Connecting to Duet:

I am guessing that everyone else who got this working and told me that it just worked, already had this set....

Very likely. I think it's the default in the configurator.

Dodika3997

@dc42 Hello, and good morning, ive now come across this problem but i have no idea how to do any of the things you just said to do. i know this forum is old, but i was hoping if you could run me through how to do such things that you describe to do to fix

State: Offline (Error: No more baudrates to test, and no suitable baudrate found.)

Thank you for your time and have a good day

Phaedrux

@Dodika3997 Do you have M555 P2 in your config.g?

Dodika3997

@Phaedrux I dont even know how i would look for that or how to do that.

Phaedrux

@Dodika3997 You've got a bit of a learning curve ahead of you: https://duet3d.dozuki.com/c/Getting_Started