@calvinx said in Ender 3 settings?:

i have a duet wifi on a ender 3

what do you need ?

Can you post your config.g please....?
Just need to check a few things

PLA PetG on glass..... open build printer 50c bed for pla and 60 for petg bed size is 300x200

Good stuff.... I use a lot of 3D Lac as well

Sorted now thanks for the help…..

Just needed the S2 command....

I use G28 and G29 commands using a BL touch

11:22:13 PMCancelled printing file PANEL.gcode, print time was 0h 2m
Error: G0/G1: insufficient axes homed

Hi All….

Updated to latest firmware, now my printer will not print...
Something to do with homing G30....

What do I need to change to get to work

Thanks in advance

Many Thanks for the info… See how it goes... cheers

Can you guys with the Creator pros please post your home xyz and home all .g files please?

Many thanks I will try that now…

Bl Touch fitted to a corexy, all working or seems to be…
What code do I need to change for the nozzle height for printing?

config.g
G31 P50 X29 Y13 Z1 ; Set Z probe trigger value, offset and trigger height