Thanks for the great reply's...
Last night I got busy and started setting the nozzle closer to bed, I did make some progress. I think I'm pretty close, maybe flattening too much, but I still think there's not enough material being extruded even though I've nearly halved the amount that was already calculated, at least that's my feeling (see pic)?
@mikeabuilder "If you are not aware of the "baby steps" button in DWC and PanelDu"
I noticed the "Baby steps" buttons but was uncertain of exactly how much the increments would impact the closeness of the nozzel so I was doing small increments via editing the config.cfg. I'll try the buttons next... cool feature!
I can do a feeler guage... appx. what should be the starting/ending thickness?? great idea by the way...
Maybe its a Cure setting that's causing the extrusion issue??
Is Cura also not the "best" for beginners to start with?
VB,
EDIT
Upon looking through the Cura settings you were correct in the material thikness. I'm using 1.75 but Cure=a generic PLA is 2.85, and won't let me change it and gives the following error..