Thank you for your time!!
Latest posts made by S_Mabe
-
RE: Duet WiFi always starting and will not connect to WiFi
-
RE: Duet WiFi always starting and will not connect to WiFi
Tried that firmware and does the same thing.
-
RE: Duet WiFi always starting and will not connect to WiFi
I just bought it from Filastruder. Finally got the rest of the stuff needed and have begun to set it up. I bought it Febuary 28th, so I think I am still in the return window. Seems everything else works. I have not connected any heaters yet, but the motors are running properly, and controllable from the Panel due. Config changes are working. Had to reverse some motors. Just no wifi.
I have checked it after putting the different firms and it returns as 2.03 or whatever I flash to it. The wifi module lights up when flashing firm.
-
RE: Duet WiFi always starting and will not connect to WiFi
Would it be better to erase the board and try it all over? I have tried original sd for stock, to updating the the wifi firm, to trying a fresh sd card with different firmwares from 2.0-2.03 betas and it always returns the same on these commands. I never get an idle message.
-
RE: Duet WiFi always starting and will not connect to WiFi
And still just get this
-
RE: Duet WiFi always starting and will not connect to WiFi
The date it displays for the wifi firm is identical to the WifiServer-1.22.bin file when sending an M115 command.
-
RE: Duet WiFi always starting and will not connect to WiFi
Yes I took off the -1.22 from the file so it was identical to the one I removed, and uploaded, I guess I mean flashed with an M997 S1 command using Yat.
-
RE: Duet WiFi always starting and will not connect to WiFi
This is after Uploading Wifiserver-1.22.bin
-
RE: Duet WiFi always starting and will not connect to WiFi
Both displayed progress on my panel due when uploading.
-
RE: Duet WiFi always starting and will not connect to WiFi
I am back to trying the 2.02 (RTOS) I put these on a blank sd card along with the WIfiServer-1.22bin. Extracted Webcontrol to WWW folder. I sent a M997 S0, then a M997 S1. Said upload complete.