@bearer
Thank you again.
if restore - write

@bearer
This of course will not help, but when turned on, the entire Board (LEDs) and screen flashed

@bearer
Maybe due to the fact that I pressed the power button?

@bearer

@bearer
I have already removed the excess

I'll draw it now

@bearer said in Prompt where to begin recovery duetwifi and PanelDue:

@juri79 said in Prompt where to begin recovery duetwifi and PanelDue:

Yes. works without connecting to the usb

when with a bit of luck it is only the mosfet (TR7) for the PS_ON pin you need to replace. picture would still be helpfull.
(although TR7 will not have any effect on a faulty PanelDue)
Thank you

@bearer
ver 1.03
jumper ext_5v I am not set
No other voltage was applied to the Board.

@droftarts
Yes. works without connecting to the usb

Hello!
Need help to restore the board.
Instead of 5V filed 12v

Not working panel due 7 (when connecting to another panel due 7) - works)
Not working pin ps on
the rest of the board is working.

Prompt where to begin recovery