Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. ErwinH78
    • Profile
    • Following 0
    • Followers 0
    • Topics 8
    • Posts 34
    • Best 2
    • Controversial 0
    • Groups 0

    ErwinH78

    @ErwinH78

    4
    Reputation
    2
    Profile views
    34
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    ErwinH78 Unfollow Follow

    Best posts made by ErwinH78

    • RE: True Bed Leveling

      Hey Guys..... sorry for my late answer and thx a lot for help.

      the issue was really caused by the Y-rails. i fixed that and with the result i´m very happy.

      what do you think?

      jfjgfj.jpg

      posted in Duet Web Control
      ErwinH78undefined
      ErwinH78
    • automatic switch off printer

      Hi Guys,

      I wired an a relay and now it´s possible to switch off the printer with M42 P4 S255 via Out9 .

      Is it also possible if the temperature of heating bed, nozzle or print camber is too high to switch off automatically via the board?

      i mean to check the configurated thermistors and if they are too hot to send the command...
      like switch on hotend fan at 45 degree

      posted in General Discussion
      ErwinH78undefined
      ErwinH78

    Latest posts made by ErwinH78

    • RE: Problem with downgrade to 3.1.1

      i got it with bussa. it´s done thx

      posted in Beta Firmware
      ErwinH78undefined
      ErwinH78
    • RE: Problem with downgrade to 3.1.1

      1616530128459-unbenannt.jpg

      posted in Beta Firmware
      ErwinH78undefined
      ErwinH78
    • RE: Problem with downgrade to 3.1.1

      @Phaedrux thx.

      i tried that but it doesn´t work... i uploaded the file and dwc was unzipping but nothing else happened...

      while downgrade i had an error and not all command worked. i guess there is something wrong

      posted in Beta Firmware
      ErwinH78undefined
      ErwinH78
    • Problem with downgrade to 3.1.1

      hi guys,

      i wanted to downgrade from 3.2.2 to 3.1.1.

      found this manuel but it doesn´t works.

      in dwc now its 3.2.2 and with M115 it´s 3.1.1 😕

      don´t know how i can fix that.

      hope someone can help

      2.JPG 1.JPG

      posted in Beta Firmware
      ErwinH78undefined
      ErwinH78
    • RE: Downgrade from 3.2beta2 to 3.1.1

      @MaxGyver said in Downgrade from 3.2beta2 to 3.1.1:

      sudo apt -y --allow-downgrades install duetsoftwareframework=3.1.1 duetcontrolserver=3.1.1 duetruntime=3.1.1 duetsd=1.0.6 duettools=3.1.1 duetwebcontrol=3.1.1 duetwebserver=3.1.0 reprapfirmware=3.1.1-1

      hi guys. i tried to downgrade from 3.2.2 to 3.1.1 but it doesn´t works.....
      Unbenannt.JPG

      posted in Beta Firmware
      ErwinH78undefined
      ErwinH78
    • RE: automatic switch off printer

      understood. thx 🙂

      posted in General Discussion
      ErwinH78undefined
      ErwinH78
    • RE: automatic switch off printer

      ah ok thx. i check that out...

      to run this daemon.g i have this to start in config or it starts automatically

      posted in General Discussion
      ErwinH78undefined
      ErwinH78
    • RE: automatic switch off printer

      ;Switch Off Printer
      M950 P4 C"out9"

      posted in General Discussion
      ErwinH78undefined
      ErwinH78
    • RE: automatic switch off printer

      @OwenD hmmm ok. my plan is to monitoring 4 temperatures. Heatbed, nozzle, print camber and one thermistor in my electronic bay... if there is the temperature over an set limit the printer should power off.

      with M42 P4 S255 i can power off the printer but i´m not sure to handle this depending of four temperatures

      posted in General Discussion
      ErwinH78undefined
      ErwinH78
    • RE: automatic switch off printer

      thx. i´m already using M143 in my config:
      if there is an fault with the ssr the heatbed can´t be switched off by that... so i want to send command via out9 to my relais. this will power off the main switch.

      M308 S0 P"temp1" Y"thermistor" A"Heizbett" T100000 B4138 ; configure sensor 0 as thermistor on pin temp0
      M950 H0 C"out1" T0 ; create bed heater output on out0 and map it to sensor 0
      M143 H0 S135 ; set temperature limit for heater 0 to 135C
      M140 H0 ; map heated bed to heater 0
      ;M307 H0 R0.633 C343.0 D3.15 S0.6 V24.2 ; disable bang-bang mode for the nozzle heater and set PWM limit and PID settings
      M307 H0 R0.666 C300.5 D2.33 S0.60 V24.2 ;110 Grad 60% Leistung

      ;Nozzle
      M308 S1 P"temp0" Y"thermistor" A"Nozzle" T100000 B4725 C7.06e-8 ; configure sensor 1 as thermistor on pin temp1
      M950 H1 C"out0" T1 ; create nozzle heater output on out0 and map it to sensor 1
      M143 H1 S280 ; set temperature limit for heater 1 to 280C
      M307 H1 R1.360 C368.300:368.300 D5.30 S1.00 V24.1 B0 ; disable bang-bang mode for the nozzle heater and set PWM limit and PID settings

      posted in General Discussion
      ErwinH78undefined
      ErwinH78