After a couple days of near continuous printing, it seems like 3.2 has resolved my issue. Marking as solved.
Best posts made by sigfried
-
RE: Duet 3 Software reset mid print at seemingly random times
Latest posts made by sigfried
-
RE: Duet 3 Software reset mid print at seemingly random times
After a couple days of near continuous printing, it seems like 3.2 has resolved my issue. Marking as solved.
-
RE: Duet 3 Software reset mid print at seemingly random times
@Phaedrux Awesome, trying that now. Will report back once I've completed some longer prints.
-
RE: Duet 3 Software reset mid print at seemingly random times
Thanks, I'll give 3.2 a try.
-
RE: Duet 3 Software reset mid print at seemingly random times
Standalone. Here is the text from M122. Are there any risks to trying the pre-release firmware beyond instability?
=== Diagnostics === RepRapFirmware for Duet 3 MB6HC version 3.1.1 running on Duet 3 MB6HC v1.01 or later (standalone mode) Board ID: 08DJM-956BA-NA3TN-6J1D6-3S86P-TVBUT Used output buffers: 1 of 40 (17 max) === RTOS === Static ram: 154604 Dynamic ram: 162536 of which 76 recycled Exception stack ram used: 312 Never used ram: 75688 Tasks: NETWORK(ready,356) ETHERNET(blocked,436) HEAT(blocked,1188) CanReceiv(suspended,3820) CanSender(suspended,1488) CanClock(blocked,1424) TMC(blocked,204) MAIN(running,4528) IDLE(ready,76) Owned mutexes: LwipCore(NETWORK) === Platform === Last reset 00:00:48 ago, cause: power up Last software reset at 2021-01-04 22:41, reason: Memory protection fault, spinning module GCodes, available RAM 75392 bytes (slot 1) Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x04427804 BFAR 0x0100a8e4 SP 0x204128c4 Task NETW Stack: 0040f6dd 00406f7c 21000000 004633e8 61000000 10000000 20415abc a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 Error status: 0 MCU temperature: min 28.7, current 37.6, max 37.7 Supply voltage: min 23.9, current 24.0, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes 12V rail voltage: min 12.0, current 12.1, max 12.2, under voltage events: 0 Driver 0: standstill, reads 39130, writes 14 timeouts 0, SG min/max 0/0 Driver 1: standstill, reads 39131, writes 14 timeouts 0, SG min/max 0/0 Driver 2: standstill, reads 39131, writes 14 timeouts 0, SG min/max 0/0 Driver 3: standstill, reads 39132, writes 14 timeouts 0, SG min/max 0/0 Driver 4: standstill, reads 39135, writes 11 timeouts 0, SG min/max 0/0 Driver 5: standstill, reads 39136, writes 11 timeouts 0, SG min/max 0/0 Date/time: 2021-01-04 23:27:04 Slowest loop: 55.65ms; fastest: 0.21ms === Storage === Free file entries: 9 SD card 0 detected, interface speed: 25.0MBytes/sec SD card longest read time 2.5ms, write time 0.0ms, max retries 0 === Move === Hiccups: 0(0), FreeDm: 375, MinFreeDm: 375, MaxWait: 0ms Bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 === AuxDDARing === Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 === Heat === Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 Heater 0 is on, I-accum = 0.0 Heater 1 is on, I-accum = 0.0 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is doing "M190 S65" in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === Network === Slowest loop: 14.34ms; fastest: 0.03ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions HTTP sessions: 2 of 8 - Ethernet - State: active Error counts: 0 0 0 0 0 Socket states: 5 2 2 2 2 0 0 0 === CAN === Messages sent 191, longest wait 0ms for type 0 === Linux interface === State: 0, failed transfers: 0 Last transfer: 48175ms ago RX/TX seq numbers: 0/1 SPI underruns 0, overruns 0 Number of disconnects: 0 Buffer RX/TX: 0/0-0
-
RE: Duet 3 Software reset mid print at seemingly random times
Alright, so having updated to 3.1.1, I'm still getting resets. Had one long print succeed, then several resets only 10-15 minutes into prints.
-
RE: Duet 3 Software reset mid print at seemingly random times
@Veti This seems to have resolved my issue, running a couple longer prints to confirm. Will resolve once I've got a couple completed prints without a reset.
-
Duet 3 Software reset mid print at seemingly random times
Repost from another part of the forums with better information and in the right place. Old post has been deleted.
I have been having problems with my Duet 3 on a coreXY machine resetting spontaneously mid print. The timing ranges from an hour into a print to 6 hours. I have not been able to cause the issue intentionally. Below is the result of a M122 after a crash (the printer has been power cycled, but the last software reset is what I've been seeing). I am running RepRap 3.01-RC-9. This problem seems similar to this question:
https://forum.duet3d.com/topic/19635/reset-during-print-part-2-duet-3-1-1-3-2beta3-duet3-sbc/14?_=1609649174634
where it was eventually resolved with a warranty. Config is attached config.g . Any assistance would be appreciated.=== Diagnostics === RepRapFirmware for Duet 3 MB6HC version 3.01-RC9 running on Duet 3 MB6HC v1.01 or later Board ID: 08DJM-956BA-NA3TN-6J1D6-3S86P-TVBUTUsed output buffers: 2 of 40 (11 max) === RTOS === Static ram: 154572 Dynamic ram: 161880 of which 44 recycled Exception stack ram used: 288 Never used ram: 76432 Tasks: NETWORK(ready,132) ETHERNET(blocked,444) HEAT(blocked,1196) CanReceiv(suspended,3824) CanSender(suspended,1484) CanClock(blocked,1428) TMC(blocked,216) MAIN(running,4532) IDLE(ready,80) Owned mutexes: === Platform === Last reset 00:00:58 ago, cause: power up Last software reset at 2021-01-02 18:59, reason: Memory protection fault, spinning module GCodes, available RAM 76120 bytes (slot 1) Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x04427804 BFAR 0x81001838 SP 0x20411d0c Task 0x45485445 Stack: 0040fa2d 0040f8da 61000000 00000001 204118bc 20411d84 20411d60 a5a5a5a5 a5a5a5a5 a5a5a5a5 0040fa2d Error status: 0 Free file entries: 10 SD card 0 detected, interface speed: 25.0MBytes/sec SD card longest block write time: 0.0ms, max retries 0 MCU temperature: min 30.2, current 39.5, max 39.6 Supply voltage: min 24.1, current 24.1, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes 12V rail voltage: min 12.0, current 12.1, max 12.2, under voltage events: 0 Driver 0: standstill, reads 25276, writes 14 timeouts 0, SG min/max 0/0 Driver 1: standstill, reads 25276, writes 14 timeouts 0, SG min/max 0/0 Driver 2: standstill, reads 25277, writes 14 timeouts 0, SG min/max 0/0 Driver 3: standstill, reads 25278, writes 14 timeouts 0, SG min/max 0/0 Driver 4: standstill, reads 25281, writes 11 timeouts 0, SG min/max 0/0 Driver 5: standstill, reads 25282, writes 11 timeouts 0, SG min/max 0/0 Date/time: 2021-01-02 22:00:54 Slowest loop: 3.76ms; fastest: 0.14ms === Move === Hiccups: 0(0), FreeDm: 375, MinFreeDm: 375, MaxWait: 0ms Bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 === AuxDDARing === Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 === Heat === Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === Network === Slowest loop: 4.90ms; fastest: 0.03ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0) HTTP sessions: 1 of 8 - Ethernet - State: active Error counts: 0 0 0 0 0 Socket states: 5 2 2 2 2 0 0 0 === CAN === Messages sent 232, longest wait 0ms for type 0 === Linux interface === State: 0, failed transfers: 0 Last transfer: 58326ms ago RX/TX seq numbers: 0/1 SPI underruns 0, overruns 0 Number of disconnects: 0 Buffer RX/TX: 0/0-0