@oc_geek Perfect, this is exactly what I was looking for. That way I can have my sensor by my filament input/guide rather than on the print head. Thanks so much!

Quick question that I couldn't find the answer to in the wiki. I'm running a 3 Mini 5+ (currently 3.3) and a toolboard 1LC. My question is can I run a standard on/off switch type filament sensor plugged directly into the Mini 5+? Or does the sensor HAVE to run up to the toolboard for it to work. In the documentation for the laser sensor it indicates it needs to be connected to the same device driving the extruder motor? Is that true for all sensors or just the laser one? Thanks!

@t3p3tony Yeah, I was hoping to avoid that in case I forget or slice with an 'alternate' slicer, etc.

@cosmowave Awesome! Thank you.

@phaedrux Ok, I downgraded my Duet to 3.3 and the PanelDue to 3.2.11. Tried a new 4-pin cable on io_0 and also tried a ribbon cable. Panel lights up and just says connecting still.

Hey, this is probably a simple question but I was having a hard time finding an answer. I have a chassis fan that cools my Duet 3 mini 5+ (firmware 3.4 beta 3). I have it set to turn on when the machine is powered on, but I was wondering if there is a way to have the fan only engage once a print starts? Thanks in advance.

@phaedrux Yes. I even tried changing baud rates to different options in config.g and the panel. No dice.

@phaedrux Hey. I finally got time to get my replacement board installed and it is working well. However, the PanelDue 7i still won't talk to the board via ribbon cable, I ran a M111 S1 P3 (via USB) and no communication is present. Not sure what my next step is?

I did update the screen to 3.4.0-pre1 and the board to 3.4.0-beta3.

@dc42 Thank you! Solved.

I'm trying to update my Mini 5+ from 3.3 to 3.4.0 beta 3. I was unable to find a zip file (like with the upgrade to 3.3) so I downloaded the file Duet3Firmware_Mini5plus.uf2 and uploaded it to the system folder. I was asked if I wanted to update the firmware, I said yes, and then received: "Error: M997: In-application programming binary "0:/firmware/Duet3_SDiap32_Mini5plus.bin" not found"

I'm not sure where to find this file or how to go about updating my board to this newest version. Any help would be appreciated.