@fcwilt Thank you. That worked. But I almost got a heart attack. I Checked the connection, checked it again, then checked the connection. I flipped the switch and I heard a strange sound! It was just my arm had snagged the curtin and it popped on the rod.

Anyway, it worked. Thank you

@fcwilt Thank you. That worked. But I almost got a heart attack. I Checked the connection, checked it again, then checked the connection. I flipped the switch and I heard a strange sound! It was just my arm had snagged the curtin and it popped on the rod.

Anyway, it worked. Thank you

@fcwilt Greate, thank you. So just to be clear, when you say jumpers, I can just use a wire with terminals on both ends and cross + to + and - to -?

Hi,

So I am upgrading my Railcore XL from a Duet 2 wifi and expansion board to Duet 3 6CH V1.01. I got everything working except the heated bed. The problem is the bed is not getting power. I have the power from the PSU to the Power in and the bed connected to OUT 0. But I just realized that I need to connect something to the OUT Power in terminal. Is that right? I don't need extra power so should I just connect a wire from the VIn in to the OUT Power in terminals? I just want to check before I burn down my house.