figured id share this diagram i made scene i took the time to color code it lol...
maybe it helps you maybe it doesn't.
https://ibb.co/4T7qtG3

no network. nothing. i had it on the floor and i moved it on the table and i plugged my z steppers up and was trying to connect . i thought it was the Ethernet cable i made so i clipped the ends off and made another and noticed that there was no light on the port.

@bearer
Green light goes off after lil.

3v to G

Talk about shooting your self in the foot. Totally my fault had the board about a week. Been down a month, what's another 2.

Printer is a cr10s pro. I actually made sure all the stops where on the outer pins. I really don't know how I missed z.

Must have over looked the zstop. That offset tho.

Best regards, 10ftDeep

figured id share this diagram i made scene i took the time to color code it lol...
maybe it helps you maybe it doesn't.
https://ibb.co/4T7qtG3