Posts made by 3dprintingnut

@Veti yeah, I use E3D V6 hotend with silicone sleeve, is there any way to close the warning?

@dc42 another issue, it shows below warning as soon as turn on power, do you know why and how to fix it?

@dc42 it's fixed, thank you very much.

@Veti yeah, that's right.

@Veti those chips are not hot, they are not being used. it reports error as soon as power up.

@dc42 said in short-to-ground reported by driver(s) 2 4 9:

ou are getting those errors without even enabling the drivers

yeah, I haven't enabled 2 4 9 drivers, coz I only need 7 axis, and used 2 drivers on duex5, so the rest 3 drivers were removed on board. is there any way to stop popping up the error?

Error: short-to-ground reported by driver(s) 2 4 9
Error: over temperature shutdown reported by driver(s) 2 4 9

hello, everyone

I have a customized 7 axis board based on duet 2 wifi & duex5, it keeps showing below errors as long as turn on power:
Error: short-to-ground reported by driver(s) 2 4 9
Error: over temperature shutdown reported by driver(s) 2 4 9

is there any way to fix it by revise the config.g? it's really boring to keep popping up the error.