Topics created by airflair

@airflair said in Connection interrupted, HTTP request timed out:

Is there a way to connect Ethernet cable to Duet2 Wi-fi board

No.

@airflair said in Connection interrupted, HTTP request timed out:

Can I use laptop and USB cable to update firmware?

Yes, there are a few ways.

https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_firmware

First, though, can you connect to the wifi after a power cycle now?

If not, can you connect via USB and use YAT to send some commands to get the status of the board? Send M122 and copy and paste the results here. That will let us know if the firmware installed or not.

The next thing to try would be to test the wifi module in access point mode where it creates a network and you connect your computer to that network, bypassing your own wifi router. It the connection works well that way we know the issue is with the wifi router or the module itself.

https://docs.duet3d.com/User_manual/Reference/Gcodes#m589-configure-access-point-parameters