Posts made by AKLion

Duet 2 wifi, is it possible to put a second limit switch Z

My calculations show that the printer consumes no more than 50 watts of power, I wonder how wrong I am, did anyone take measurements?

What do you think I need the power of the power supply if the power of the heater on the extruder is 30 watts, there are 3 motors of mute 17 40 mm high and the motor on the extruder is 20 mm high. The bed is fed separately. Will I have enough 24V 100W power supply or need more?

What do you recommend to install the Wifi camera on the printer?

@jay_s_uk Большое спасибо, это то что я искал
Thanks a lot, this is what I was looking for

Is it possible to view the model in 3D viewer code before printing?

@Phaedrux This BTT Smart Filament I want to install directly on the drum. Что означает эта строка? M591 D0 P7 C"e0stop" L7 R50:200 E15 S0 Я хочу поместить этот датчик здесь. What will I need to change to make it work there. It is necessary that if the supply of plastic does not occur for a certain number of seconds, the printer stops working.

Is it possible to connect such a sensor to Duet wifi

Continuing to study the control board, I got to the config.g file and I see in the first line "; Configuration file for Duet WiFi (firmware version 1.21)" But I already have firmware 3.2 where can I get the config.g file for version 3.2?

Thanks to all!!!

Всё получилось...!
Everything worked out...
Снимок экрана 2021-01-16 в 01.52.37.png

@DIY-O-SphereI tried it, but the update doesn't work for some reason. The file is loaded, the program shows that it is being updated, but in the end nothing is updated.

Thanks, I did it and got the java error!

The firmware version has changed, the web interface cannot be updated. I tried it but it didn't work.

Good day.
I got my hands on a duet 2 wifi V1.04 board and a PT100 board for a temperature sensor. Now on the board there is such a firmware as in the screenshot.
I read the recommendations and it says that it is advisable to update everything to the latest versions. But when I went to the page in the github https://github.com/Duet3D/RepRapFirmware/releases/tag/3.2, then I saw a lot of files, I'm confused which of the files need to be updated and in what order to do it?
I will collect such a handsome man.

Forgive me for my bad English, I am from Russia and translate everything through a google translator.