Topics created by Albatroz

I have also replicated this issue with firmware version 3.5.4 using Orcaslicer GCODE. I was able to recover operation by toggling off "Exclude Objects"

Oddly, this was working fine for slicing normal STL files but occurred when I was running Orcaslicer's built-in pressure advance calibration tests.

@chrishamm Wow. I’m astonished with the almost instantaneous answer and, on top of that, a double solution. Thank you so much. This is also why I use only Genuine Duet3d stuff.

@phaedrux Wow! This is a real fast response. One more reason to be very pleased to pick up an original Duet. Thank you for your prompt answer phaedrux. I can confirm that solved the problem, because meanwhile is what I’ve done and now works again. It seems that the DNS was not resolving the address correctly, isn’t it?
Thank you so much again. Have a nice evening.