Topics created by AMPMAKER

@ampmaker Don't mean to revive an old thread, but I'm just curious if you were able to get your JGAurora A8 completed and printing successfully. I'm doing a conversion/upgrade and am really only keeping the movement mechanics intact and If your up to it, would like to chat about problems you had/settings you used to get it up and running sucessfully. I'd like to learn from any issues you had hahaha. Drop me a line if you're interested in chatting!
-Kyle

@AMPMAKER said in Cannot connect to DWC Simple fix??:

Send M552 S0, then send M552 P192.168.1.xx, then send M552 S1. You should then be able to connect DWC. In DWC go to the System editor and edit the M552 command in config.g to have that IP address.

Send M552 S0, then send M552 P192.168.1.xx, then send M552 S1. You should then be able to connect DWC. In DWC go to the System editor and edit the M552 command in config.g to have that IP address.

Maybe the lingo was not correct..sorry☹