Topics created by Baenwort

@baenwort said in per filament load/unload with multiple extruders per nozzle:

Since my macros are extruder specific I presume I need a variable in the filament area unload.g to tell which tool that filament is loaded in and select the right macro?

The example code should work as is in that regard. The FW will automatically refer to the extruder which is currently activated by tool selection. Is it even possible to select the unload filament menue from an inactive or standby tool?

@dc42

Seems so. It is a Duet Smart Probe based system from SeeMeCNC. Being a strain probe I expected maybe some difference but this was a rather large difference in results.

It makes me think I might want to spend some time tuning the F parameter.

Use 2.0.7 with 2.05.1 as that is the DWC version provided in that release.

Well I don't think changing the sensitivity is necessarily a problem.

https://duet3d.dozuki.com/Wiki/Smart_effector_and_carriage_adapters_for_delta_printer#Section_Programming_the_sensitivity

@chrishamm could tell you what has changed.

Documentation will have to be updated to match the new DWC format I suppose.

Did a 150mm square as that is the largest accurate measurement device I have.

Printed in ABS.

20200426_133547.jpg

I don't understand what you mean by a toe print. Can you provide a reference I can scale in Cura?