@Phaedrux Turns out, I am just really bad at math and gear ratios. The Z-axis is moved with some gears and belts, and I dramatically miscalculated the number of steps per mm for the z axis. I still need to figure out the math exactly, but once I increased it from 5 to around 200, it is working correctly.
Thank you for your help, and sorry for wasting your time...
Best posts made by BismuthBlues
-
RE: I need help with setting up a BLTouchposted in General Discussion
-
RE: I need help with setting up a BLTouchposted in General Discussion
@Phaedrux Thanks! Once it is up and working, I plan on doing a detailed write up with a fair number of pictures.