first of all thanks for this awsome piece of hardware !
And please excuse my bad english
I recently set up everything and got it running after a few tweaks.
But im running into a problem, not being able to control the fan 0 port
Others work just fine… M106 P* S1 (Same Fan used for testing on all ports)
When i measure those i get stable 24v from other ports but on port 0 only 3.2 -3.5
because i need some prints to switch to my new printer i tryed to remap P2 to the extruder/tool 0
M563 P0 D0 H1 F2 ; Define tool 0
but i doesnt work (even when tool is active)
Manual M106 P2 S1 works...
I double checked if fan is in temp control mode or inverted but its not.
M106 P0 S0 ; (supposed to be Partcooler)
M106 P1 T45 H1 ; (Hotendcooler)
M106 P2 S0 ; ( spare part cooler - but cant get it running with remap)
may my board be broken ?
im thankfull for any advice or help
greetings from germany