I m not sure if this should be here, or under Duet Web Control Topic.
Still seeing this error on occasion.
"Warning: Lost connection to Duet (Timeout while waiting for transfer ready pin)"
M122 shows:
=== Platform ===
Last reset 00:00:38 ago, cause: software
Last software reset at 2020-05-25 18:39, reason: Assertion failed, spinning module GCodes, available RAM 71820 bytes (slot 0)
Software reset code 0x4123 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a80f BFAR 0x00000000 SP 0x2045fe9c Task MAIN
Stack: 00000194 00484cd0 00463dbf 00000001 0045831f 20428990 2044cd58 2044cc08 2043f1a8 00000001 2043f120
Error status: 0
Usually only after uploading file to print. Once printer is reset and zeroed, I can print the file with no errors.
I have attached my config.g, the results from the M122 and console text prior to M122 along with the file I was printing.
Custom CoreXY
Duet3 +RPI 4B
DWC 3.1.1
DSF 3.1.1
Firmware: RepRapFirmware for Duet 3 MB6HC 3.1.1 (2020-05-19b2)
config.g
Console with M122 Results 5_25_2020.txt
CuttingBoardHangerHalves.gcode