That was exactly the issue. the white rhino logo on the bed had a different effect on the compensation process. Thank you! Now I have to look for a bed with a solid color. Time to spend on a BuildTAK surface. Ho-Hum.

I'm hoping someone can help me out with some suggestions. whenever I run the Mesh bed compensation I'm running into substantial height deviation from one point to another (see attached image of the map). Most of my prints are failing since the bed isn't completely level. Does anyone have any suggestions for fixing this? It's a magnetic Wanhao bed that I'm using with a mini differential IR height sensing board, that otherwise seems to work very well.

Any help or suggestions would be greatly appreciated. Let me know if you have any other questions.

Thank you in advance,

0_1555622981896_Mesh map.jpeg

Hello, I'm hoping someone can help out - just finishing a CoreXY build, and for some reason when configuring the extruder motor and testing direction, I ended up with some magic smoke on the E0 driver... I'd like to re-assign the extruder to E1 - I've changed the config.g from:

M569 P3 S1 to M569 P4 S1 - but for some reason, the connection still seems to be on the P3 (E0) driver? What am I missing?

Thanks in advance,