Topics created by CvetanTokov

Yes i tryed it , the speeds are even, same problem . Now i will try with slow instantaneous speed changes - around 100 to see if there is any change.
I am not sure about kinematics, i rely on only the CAM software, should i change any kinematics setting on duet ?
This is the configuration of machine:

IMG-6139 - Copy.jpg

@CvetanTokov related github issue:
https://github.com/Duet3D/RepRapFirmware/issues/620

T3P3 created this issue in Duet3D/RepRapFirmware open Tn P6 entered in resurrect.g when it should be Tn P0 #620

@dc42 Thank you ,i tryed everithing arangment of brackets excep that you wrote, i manage to make it work without "exists" ,now i will change it , thank you very much.