Thank you so much for all your help!
How do I switch to driver 4? Which port on the board is driver 4? What needs to change in my config file?
Posts made by dburden
-
RE: Driver error - phase B short to groundposted in Duet Hardware and wiring
-
RE: Driver error - phase B short to groundposted in Duet Hardware and wiring
@droftarts Hello again, just wanted to see if you got my last post.
-
RE: Driver error - phase B short to groundposted in Duet Hardware and wiring
@droftarts Thanks for your help!
M115: FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.4.5 ELECTRONICS: Duet WiFi 1.02 or later + DueX5v0.11 FIRMWARE_DATE: 2022-11-30 19:36:12
The stepper motor is an LDO-42STH25-1404MAC, and it's the extruder motor. I checked the motor operation by plugging it into another duet board, and checked the wiring by connecting the motor into the problem board with another working LDO stepper motor cable.
-
Driver error - phase B short to groundposted in Duet Hardware and wiring
My printer was working with no problems, but suddenly, the extruded motor stopped working with the error “Driver 3 error: phase B short to ground”.
Checked the stepper motor, and it works fine, how can I troubleshoot the driver issue?