Topics created by DronBroks

@DronBroks said in Duet Web control is not available at time of printing:

@Phaedrux said in Duet Web control is not available at time of printing:

Can you share one of your volumetric gcode files?

And where to put this file?

If it's too large to upload directly you can try zipping the gcode file and then changing the file extension to .txt and uploading that. Otherwise put it on dropbox or google drive and share a link.

@DronBroks said in Duet Web control is not available at time of printing:

There are many subfolders (each project has its own folder). But this problem does not depend on the depth of nesting. The interface also freezes if you print a file from the root of the card and from a subfolder.

I was just speculating that a large number of folders could be causing DWC to spend a lot of time searching recursively through folders causing issues.

One way to test would be to place your SD card in aPC, cut and paste the contents of the gcodes folder to your PC as a backup, and then see if the DWC still has problems responding.